The BMW 4 Series Gran Coupé contains a number of BMW EfficientDynamics technologies as standard, including the Auto Start/Stop function, Brake Energy Regeneration and Electric Power Steering. These technologies combine to guarantee intelligent energy management – and sustainable mobility.The Auto Start/Stop function makes sure that fuel is only used when the car is actually driving. When the vehicle comes to a temporary standstill, for example at traffic lights or in stop-and-go traffic, the Auto Start/Stop function saves fuel by switching off the engine as soon as the car is idling and when the car brakes to a complete standstill.
A signal in the Info Display indicates that the Auto Stop/Start function is active. As soon as the foot is taken from the brake , the engine turns itself back on automatically.
The Auto Start/Stop function never compromises driving comfort and safety, as it remains inactive if the engine has not reached its ideal running temperature, the interior has not yet been sufficiently heated/cooled, if the battery level is too low or if the steering wheel is being turned. A central control unit restarts the engine if required, even when the car is at a standstill − for example, if the car starts to roll forward or if the windscreen becomes foggy. The Auto Start/Stop function can be switched off at any time with the push of a button.
Every time you brake, kinetic energy is generated, and until recently, this energy has gone unused. Brake Energy Regeneration takes advantage of this long-overlooked potential. It harnesses the coasting energy that is generated whenever the driver brakes or takes their foot off the accelerator and turns it into electricity. This electricity is then used to charge the car battery. The intelligent energy management system means that the alternator no longer needs to run permanently, which reduces the strain on the generator. The result is reduced fuel consumption and increased performance – classic BMW EfficientDynamics.
Optimal, perfectly-timed gear changes can help save fuel, particularly in urban environments and over long distances. Optimal gear changes, less fuel consumption – the engine’s electronics system identifies the most efficient gear based on the driving situation and engine speed. An arrow lights up in the Info Display to show when it would be more efficient to shift into a higher or lower gear. The system also recognises when the car is accelerating quickly and will delay its recommendation accordingly until the engine speed has increased. Comparative tests have shown that vehicles with the Optimum Shift Indicator use around four percent less fuel.
Every time the driver steers, energy is consumed. But why should energy be consumed when the wheel is not being turned? BMW Electric Power Steering is only active when it is needed. Unlike conventional hydraulic steering systems, BMW EPS only uses energy when the wheel is actively being turned. When the steering wheel is static – e.g. when driving straight ahead along a motorway at high speed – the electric motor is inactive.